blog

Do domu > blog > firma Blog o Comparison of Negative and Positive Molds in Vacuum Molding

Wydarzenia

Nowości

Sprawy

blog

Skontaktuj się z nami

sales02@rosinpack.com

86-20-82674182

Skontaktuj się teraz

Comparison of Negative and Positive Molds in Vacuum Molding

2026-06-26

1. Basic Principles: How Do Male and Female Molds Work?

The fundamental difference between the two lies in which side of the plastic sheet fits the mold, which directly determines the product’s dimensional accuracy and wall thickness distribution.

1.1 Male Mold (Convex Mold) Forming – Inner Surface Fitting, Outer Surface Free Forming

Comparison of Negative and Positive Molds in Vacuum Molding

A male mold features a convex structure. The heated and softened plastic sheet covers the outer surface of the convex mold. Vacuum suction is then applied to make the sheet closely fit the exterior of the mold for shaping.

Forming feature: The inner surface of the finished product fits the mold, while the outer surface is formed by free stretching.

1.2 Female Mold (Concave Mold) Forming – Outer Surface Fitting, Inner Surface Free Forming

Comparison of Negative and Positive Molds in Vacuum Molding

A female mold adopts a concave cavity structure. The plastic sheet is flattened above the mold cavity. When vacuum is pumped, atmospheric pressure pulls the sheet into the cavity and fits it tightly against the inner wall of the cavity.

Forming feature: The outer surface of the finished product fits the mold, while the inner surface is formed by free stretching.

2. Comprehensive Performance Comparison: Male Mold VS Female Mold

Most blister product defects stem from incorrect mold selection. The table below summarizes all key dimensional, structural and production differences between male and female mold thermoforming for quick reference:

Comparison Items	Male Mold (Convex) Thermoforming	Female Mold (Concave) Thermoforming
Dimensional Accuracy	Delivers precise inner cavity dimensions, ideal for internal positioning structures and fitting inner trays.	Provides accurate outer contour with neat surface finish, suitable for outer casings and packaging trays.
Wall Thickness Distribution	Thickest at the top; side corners are slightly thinner. Deep cavities maintain sufficient bottom thickness and resist over-stretching.	Thinnest at the bottom. The deeper the cavity, the thinner the corners and base. Deep draws easily cause ultra-thin bottoms or perforation.
Stretching Depth	Supports deep drawing with a high stretch ratio, suitable for products with depth ≥ 30 mm.	Only ideal for shallow cavities (depth ＜ 25 mm). Deep parts suffer unstable and insufficient wall thickness.
Surface Effect & Quality	Inner surface is smooth. The outer surface is free-formed, prone to stretch lines and wave marks. External printed patterns may distort or blur.	Outer surface is clean and sharp. Grooves, ribs and buckles form fully. Engraved features and positioning edges are well-defined for premium appearance.
Pattern & Texture Retention	Predefined surface textures are stretched and faded; fine details often disappear after forming.	Mold cavity textures are fully preserved without deformation, suitable for leather grain and high-precision detailed structures.
Mold Layout & Material Utilization	Convex structure requires larger gaps between cavities, resulting in sparse layout, lower material utilization and higher raw material cost.	Recessed cavity allows compact multi-cavity arrangement, higher nesting density, better material yield and lower production cost.
Mold Cost & Durability	Simple structure, low machining cost. Fast production for aluminum and copper molds with long service life and high durability.	Complex cavity engraving increases machining cost for fine features. Cavity walls are more prone to wear.
Demolding Performance	Easy air-blow demolding, smooth release with almost no sticking.	Deep-cavity parts tightly grip the mold, easily causing sidewall scratches during demolding.
Product Rigidity	Thick bottom design ensures high overall hardness and strong structural support.	Side walls are thick, but the bottom is weak and thin; poor rigidity for deep products.

3. Pros & Cons Overview

3.1 Male Mold (Convex Mold) – Advantages & Disadvantages

Advantages

Excellent deep stretching performance with uniform wall thickness for deep products, effectively preventing breakage
High-precision inner dimensions for reliable product positioning and clamping
Thick and sturdy product bottom with superior load-bearing performance and structural rigidity
Low mold cost, high durability, stable mass production and simple debugging

Disadvantages

Stretch lines easily appear on the outer surface, resulting in ordinary appearance
Blurred edges and insufficient forming precision for buckling structures
Sparse mold layout leads to relatively higher raw material consumption

3.2 Female Mold (Concave Mold) – Advantages & Disadvantages

Advantages

Smooth outer surface with sharp edges and full forming of textures and buckles
No deformation of printed patterns, ideal for high-value cosmetic packaging
High material utilization via dense layout, lowering mass production costs

Disadvantages

Prone to ultra-thin or transparent bottoms for deep-cavity products, only suitable for shallow-cavity designs
Poor inner dimensional accuracy with unsatisfactory positioning performance
Easy side wall scratching during demolding for deep products, with high debugging difficulty

4. Practical Factory Selection Criteria (Avoid Production Risks)

4.1 Choose Male Molds For:

High-depth products (height ＞ 30mm): deep inner liners, hardware turnover trays, seedling trays, etc.
Products requiring strict inner dimensional accuracy and precise positioning: electronic component blister trays, precision product inner liners
Products needing thick bottoms and high compression & load-bearing performanceMass production projects with budget control for mold costs and low defect rate requirements

4.2 Choose Female Molds For:

Shallow-cavity products (height ＜ 25mm): food trays, mooncake trays, cookie trays, disposable meal boxes, etc.
Products with high requirements on outer contour, sealing edges, buckles and appearance texture
Products with printed patterns or fine textures requiring complete and undeformed surface effects
Multi-cavity mass production projects pursuing high material utilization and low unit cost

5. Optimization Solutions For Special Custom Products

For non-standard products requiring both deep cavity and high appearance quality, you do not need to compromise on performance:

1. Deep cavity + high appearance: Adopt male mold with pre-stretching plunger technology to balance uniform wall thickness and sharp outer edges;

2. Shallow cavity + high load-bearing: Add material storage ribs at the female mold bottom to improve the thin-bottom problem;

3. Dual-sided high-precision requirements: Adoptmatched mold forming for uniform wall thickness and flawless inner & outer surface finish.

Wyślij do nas zapytanie